Project Hardware Malvern Lever Door Handle on 155mm Bathroom Backplate - Satin Chrome (Pair)

This Malvern lever door handle on 155mm bathroom backplate from Project Hardware comes in a Satin Chrome finish and is made from zinc alloy.

Bathroom Handle for internal doors where privacy is required. If you are replacing an existing Bathroom Handle, this Handle will work with a Standard UK Bathroom Lock. For new doors you will also need to purchase a Bathroom Lock in a size to suit your door. For a 2 1/2" Bathroom Lock purchase a YKBL2N-SN&SC or for a 3" Bathroom Lock a YKBL3N-SN&SC. The CTC is 57mm (measurement between the distance of the fixing holes from the spindle to the lock). The springs are cycle tested to 100,000 lever operations and the mechanism carries a 10 year warranty for residential use. These handles are supplied without locks, latches or escutcheons, so choose these separately for the function you need.

Features

• Zinc alloy
• Satin Chrome finish
• Bathroom Handle for internal doors where privacy is required
• If you are replacing an existing Bathroom Handle, this Handle will work with a Standard UK Bathroom Lock
• Backplate Length: 155mm
• Backplate Width: 41mm
• Fixing screws supplied
• Spindle supplied

Specification

Also in this design

PR620-PB Polished Brass · PR620-PC Polished Chrome · PR620-SN Satin Nickel

Matching accessories

S640-SC Shaped Fingerplate 305mm · V1166-SC Fingerplate 462mm · V1040-SC Curved Single Robe Hook 51mm · V1042-SC Knurled Bar Hook 45mm · C1582 4-SC Straight Door Bolt 102 x 32mm (4" x 1.25") · YKTL3N-SN&SC Tubular Latch - 76mm (3") Case - 57mm Backset